Energy-efficient and convenient, the battery-operated Series J5 12VDC Chemical Metering Pump offers the same
superior features of LMI’s premium line pumps, with the added advantage of remote location operation – no AC
power needed.
With a low power consumption that draws just 1.6 amp average (19 watts at maximum speed), a typical 70 amp-hour
battery will easily operate the pump for 24 hours at top speed.
Just as rugged as the AC powered models, the Series J5 electronics are housed in a chemical resistance enclosure
at the rear of the pump for maximum protection against chemical spillage. This pump is the perfect for chlorine,
sodium bisulfate, lime, caustics and acids.
Conveniently operates off of any 12-VDC automobile battery
Each unit comes equipped with suction and discharge tubing, foot valve, suction valve and four-function
valve with continuous bleed capability for chlorine usage
Manual control knobs are readily accessible for adjusting both stroke length and frequency
Output volume is constantly adjustable during operation from zero to maximum capacity
Standard Features
12VDC power for remote applications where AC electrical power is unavailable
Low power consumption (1.6 amp average current draw or 19 watts at maximum speed)
Manual or external control for flow proportional applications
UL, CUL, NSF 50< NSF 61, CD Certifications
3FV-Three Function Valve
Optional Features
Four function valve
AUTOPRIME™ liquid end
Low level float switch
Digi-Pulse flow monitor
Repair & preventive maintenance kits
Calibration columns
Specifications
Output Codes with Standard Liquid End
Max Capacity:
Max Pressure:
J54D – 0.42 GPH (1.6 l/h)
140 psi (9.7 Bar)
J55D – 1.0 GPH (3.8 l/h)
60 psi (4.1 Bar)
J56D– 2.0 GPH (7.6 l/h)
20 psi (1.4 Bar)
Applications
Because of its convenient battery-powered operation, the Series J5 12VDC is perfect for remote locations where
power is unavailable, such as: